Where is the new energy vehicle charging port cover actuator?
How to close the charging cover? Generally, the charging port of a new energy charging vehicle is generally located, mainly in the position of the left side of the front car logo in a few parts, the position of the fuel tank cover, and the position of the vehicle logo. Hope to accept.
How to open the charging cover of BYD electric carThe elastic protective cover of the charging port of the battery car is removed. How to install the iron wire around the middle? It is not a wire or a spring, it is to automatically close the charging port, as long as it is worn on the cover and connected with the seat, You look at other people's cars, if you can't fix it, ask the repairman to fix it.
Battery car charging precautions
The first is the timing of charging. No matter which electric vehicle brand is, it will be charged when the battery remains 30%, and the car will be fully charged. For the needs of battery maintenance, it is best to perform a deep charge and discharge of the battery every month, put the battery power to 20%, and then fully charge the car.
The second point is that chargers cannot be mixed. There is a matching degree between the battery pack and the charger. The original charger and the battery have the best matching degree, so do not mix the chargers. In addition, it is best not to carry the charger with the car. The bumps in the ride may damage the components in the charger.
The third point is the charging environment. Summer is coming, and the high temperature and rainy days in summer will pose a threat to the safety of electric vehicle charging. After the electric vehicle is used up, it is necessary to wait for the electric vehicle to cool before charging. The charging should be carried out in a cool, dry and ventilated place as much as possible; if it is In rainy days, make sure the battery is dry before charging.
BYD Dolphin charging cover cannot be openedSome car owners lock the car immediately after getting out of the car, which prevents the charging port cover from being opened.
How to open BYD charging pile:
The power gear is in the "OFF" gear; unlock the whole vehicle, open the hatch and protective cover of the AC charging socket; connect the vehicle plug of the charging pile to the vehicle socket; start charging according to the instructions of the charging equipment.
BYD can automatically charge while driving.
There are four charging methods, including solar charging, deceleration charging, household power charging and engine charging.
It can be directly charged by household single-phase alternating current or three-phase alternating current, and the design also breaks through the barrier of difficult charging. The installation process of automobile electric charging pile mainly includes four steps: confirmation of charging conditions, application of power supply plan, installation and construction, and application for acceptance.
